Hi Techies,
Can you please tell me what is the all about this error? I'm getting this event in failover clustering, post which my VMs are going into pending state.
[RES] Physical Disk: PnpNotifyCSVRemoval: device \\?\STORAGE#CSVVolume#{XXXXXXXXXXXXXXXX}#{XXXXXXXXXXXXXXXX}
[RES] Physical Disk: PnpRemoveVolume: volume removal: ignoring cluster pseudo volume\?\STORAGE#CSVVolume#{XXXXXXXXXXXXXXXX}#{XXXXXXXXXXXXXXXX}
I have setup a File Share Witness for my cluster, which seems to be functioning properly. I am able to live migrate storage/vms and simulate failover. I took a look at my event log and saw that every 1-2minutes an error for SMBWitnessClient occurs.
Exact Error:
Witness Client failed the share move request for \\cfbstore\FSW with error (Element not found.)
Source: SMBWitnessClient
Event ID: 24
Level: Error
User: Network Service
I tried searching for this error but came up with nothing. Any help on this would be greatly appreciated.
Also the File Share Witness is set to Continuously Available and I have double checked permissions..
Hi all, I have removed AD Domain service role and DNS role from my DC machine as well as member nodes
then I did get them back as workgroup nodes successfully but the problem is when reconfigure proper IP address
to each node and try to connect each other,I can not ping them...is there any firewall settings that is not allowing me to ping nodes????
srm_2010
While doing thesetup for windows clustering on win 2008 R2,I installed AD on my Vm machine using dcpromo.exe.
soon after installing AD services I got different warning in ADDS i.e 1463,2886 and 614
IN DNS I got warning of EventID 4013.I did restart my DNS but still no resolution for it..
and if I bypass these events can I go on doing windows failover cluster successfully later???? or I need to correct this first???
srm_2010
Hello,
I have a cluster created for Hyper-V ,when i ran cluster group /status command available stoarge shows offline,is this expected behaviour ? during the initial setup it was showing online not sure whether it will get changed some point in time. Can some one help me to understand the behaviour?
Note:VMs are available on line without any issues.
I have deployed Server 2012 Cluster (CSV) for SQL Server 2012.
Everythings working fine but some warning and error events generating continuously.
NODE01 2050 Warning Microsoft-Windows-FailoverClustering Microsoft-Windows-FailoverClustering/Diagnostic
[RCM] ResourceControl(SET_COMMON_PROPERTIES) to SQL Server Agent (MSTUDIODB) returned 5024
NODE01 2051 Error Microsoft-Windows-FailoverClustering Microsoft-Windows-FailoverClustering/Diagnostic
[RCM] [GIM] ResType Virtual Machine has no resources, not collecting local utilization info
Any ideas?
Hi folks!
So I added a few 10Gbe cards to our 4 node HV 2012 R2 cluster. I connected two of them to the switches and almost immediately I saw this weird "Cluster Network 1" show up in Failover Cluster Manager.
I have since then disconnected the network cables, but it still shows up and the event logs keep saying that "Cluster Network 1" has failed.
Is there a way to delete this "Cluster Network 1"?
I have already set "Do not allow cluster network communication on this network". It is not used in the "Live Migration Settings". Rebooted nodes. Why is it still there!!?? Pulling my hair out here! LOL.
PS: the closest I could find on the 'net is this old thread:
-Rajeev rajdude.com
Hi guys, i have a case here:
my Hyperv 2008r R2 clusters use 8 nodes HP Blade Proliant 460c G7 to form up and storage is HP EVA. My CSV are 2TB each.
Recently, my cluster keep receiving errors lost connection to storage and restored.
Event ID: 5120
Source: Microsoft-Windows-FailoverClustering
Task Category: Cluster Shared Volume
The listed message is: Cluster Shared Volume 'Volume2' ('HyperV1 Disk') is no longer available on this node because of 'STATUS_MEDIA_WRITE_PROTECTED(c00000a2)'. All I/O will temporarily be queued until a path to the volume is reestablished.
Or
Event ID: 1038
Source : Microsoft-Windows-Failoverclustering
Task category: Physical Disk Resource
Ownership of cluster disk "Lun012_xxxxx" has been unexpectedly lost by this node. Run the validate a configuration wizard to check your storage configuration
http://support.microsoft.com/kb/2522766 <-- this didnt work as my mpio.sys version is 6.1.7601.21953
Whenever it occured, my Virtual machine will goes down and require reboot for windows and Linux. Please advise any way to fine tune this. Thank you.
So, we've been having issues with one of our clusters. Yesterday in the evening when no one was working it seems like a bunch of VMs went down. I found some errors in a couple event logs that show it seems the CSV failed but I can't find any indication as to why. My storage appliance has no record of any problems at that time, and I can't find any other possible reasons apart from a problem within the cluster.
All six nodes are running up to date Server 2012 R2, and are Managed by SCVMM 2012 R2 running off a virtual machine hosted by another cluster. My storage is a Tegile ZEBI unit, and I've thin provisioned 20TB of disk space. Disk is accessed by iSCSI on separate
NICs and separate switches from other normal cluster/VM traffic.
Below are the errors, and a screenshot of an "unknown" volume listed under my CSV, seems odd? In cluster Failover manager, under storage\Disks after selecting my CSV, in the bottom pane I see two volumes listed:
In cluster manager, I found this error:
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 2014-12-16 6:41:33 PM
Event ID: 5120
Task Category: Cluster Shared Volume
Level: Error
Keywords:
User: SYSTEM
Computer: CLUSTERHOST4.DOMAIN.INTERNAL
Description:
Cluster Shared Volume 'Volume 1' ('CSV') has entered a paused state because of '(c000000b5)'. All I/O will temporarily be queued until a path to the volume is reestablished.
I went to the node who owned the CSV, and in the event log I found this error:
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 2014-12-16 6:48:22 PM
Event ID: 1230
Task Category: Resource Control Manager
Level: Error
Keywords:
User: SYSTEM
Computer: CLUSTERHOST1.DOMAIN.INTERNAL
Description:
A component on the server did not respond in a timely fashion. This caused the cluster resource 'CSV' (resource type 'Physical Disk', DLL 'clusres.dll') to exceed its time-out threshold. As part of cluster health detection, recovery actions will be taken. The
cluster will try to automatically recover by terminating and restarting the Resource Hosting Subsystem (RHS) process that is running this resource. Verify that the underlying infrastructure (such as storage, networking, or services) that are associated with
the resource are functioning correctly.
Then this error:
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 2014-12-16 6:59:39 PM
Event ID: 1146
Task Category: Resource Control Manager
Level: Critical
Keywords:
User: SYSTEM
Computer: CLUSTERHOST1.DOMAIN.INTERNAL
Description:
The cluster Resource Hosting Subsystem (RHS) process was terminated and will be restarted. This is typically associated with cluster health detection and recovery of a resource. Refer to the System event log to determine which resource and resource DLL is causing
the issue.
Then this error:
Log Name: System
Source: Microsoft-Windows-Ntfs
Date: 2014-12-16 7:01:03 PM
Event ID: 140
Task Category: None
Level: Warning
Keywords: (8)
User: SYSTEM
Computer: CLUSTERHOST1.DOMAIN.INTERNAL
Description:
The system failed to flush data to the transaction log. Corruption may occur in VolumeId: VirtualMachines, DeviceName: \Device\HarddiskVolume7.
(A device which does not exist was specified.)
Hi,
I have setup two Windows 2012 R2 virtual web servers that sit in Microsoft Network Load Balancing cluster. This cluster is configured using Multicast Mode.
On firewall level, this cluster IP is NAT to a public IP which allows Internet access. I can ping to either server or any other server that sits on the same subnet. However, I can't ping to Google DNS 8.8.8.8 from either of the web server.
Server 1: 192.168.5.2
Server 2: 192.168.5.3
Cluster IP: 192.168.5.4 NAT to a public IP
Has anyone encountered this before?
Kindly advise.
Thanks,
Shawn
Hello,
Does anyone experience CPU spike on windows cluster.exe (windows 2012 R2, SQL Server 2014 all updates installed).
The sympton is every a couple of minutes, cpu spikes and it is driven by cluster.exe. The environment only have SQL Server running, no SCOM etc...
Microsoft is following this case with me now, but so far no progress yet, just wondering if you have the same issue?
Thanks,
Albert
Hi all,
I have a file share which I want to use as the file share witness for my Microsoft Cluster (Node majority now)
Error is :
An error was encountered while modifying the quorum settings.The share has Modify permission on the Share and NTFS for the computer accounts of the nodes.
The only catch is that the Nodes and the server hosting the File share are on different networks (Across ACLs) - though SBM (TCP & UDP 445) is open between the networks to the file share server and vice verse.
Any suggestions is much appreciated ?
Regards,
Ramu
Ramu V Ramanan
Hi We have a two node file share cluster running windows 2012 r2 standard.
we have configured two aliases in DNS(Cname) to access the clustered shares. the aliases point to the host record for the cluster resource (fileserver)
i have added the aliases in the cluster parameters using :
Get-ClusterResource <resource name>|Set-ClusterParameters Aliases "Alias1,Alias2"
Below is the issue description:
"\\Sharename is not reachable . you might not have the permission to use this network resource. contact the administrator of this server to find out if you have access permissions.
Logon Failure: the target account name is incorrect."
please note: the "Alias2" which we are using was a computer added to domain earlier, which is shutdown now as the shares are migrated to the new server. we have removed its A record from DNS and replaced with Cname of the same name, but the computer object is still present in the AD".
please help on this as we are stuck with this issue.
thanks in advance.
I’ve installed server 2012 R2 with the Failover Cluster Role and have configured two network interfaces. On the heartbeat NICs for each server I see a “Microsoft Failover Cluster Virtual Adapter Performance Filter” which is not enabled for the NIC. Should I enable this for the heartbeat NICs for the servers in my cluster?
any and all thoughts would be greatly appreciated.
Leonard Hoffman
Hi,
I've made a mistake during an operation (using Veritas Storage Foundation) and would like to remove a volume from a cluster.
Veritas actually doesn't allow me to remove the volume into its interface until i remove it from the cluster.
Do you know if i can do it (without bringing any ressource offline)?
Thanks
Hi,
We have 2 Windows server 2012 Datacenter edition with 4 NIC, I am trying to configure windows cluster and validation test passed successfully.
the 2 servers are connected to storage with fiber. during the creation of cluster i got the following error:
Unable to successfully cleanup.
An error occurred while creating the cluster and the nodes will be cleaned up. Please wait...
An error occurred while creating the cluster and the nodes will be cleaned up. Please wait...
There was an error cleaning up the cluster nodes. Use Clear-ClusterNode to manually clean up the nodes.
There was an error cleaning up the cluster nodes. Use Clear-ClusterNode to manually clean up the nodes.
An error occurred while creating the cluster.
An error occurred creating cluster 'HyperV3Cluster'.
The parameter is incorrect
To troubleshoot cluster creation problems, run the Validate a Configuration wizard on the servers you want to cluster.
Ok, Dell VRTX server with 2 blades. Primary storage will be 10 x 600Gb 10k SAS drives.
Planning on running Hyper-V cluster to host primary file server, print server, SQL, Sharepoint etc for mid sized Company (70 users). None of them are particularly heavily utilised.
If I configure a RAID5 with hotspare, this gives capacity of 8 usable drives.
Is there any advantage to creating multiple CSV's? Its all the same drives and spindles, right?
From what I've read on-line, advice seems to be that you should create CSV for VM's and additional one(s) for data storage.
But surely there is an advantage in having 9 spindles with the data striped across them in terms of performance? rather than splitting the drives in to multiple RAID5 sets...
Any advice, suggestions, ideas gratefully appreciated :)
Hyper-V Host 1 = CS1
Hyper-V Host 2 = CS2
Hyper-V Host 3 = CS3
I am successful able to live migrate VM’s from CS1 to CS2 and CS2 to CS1 but unable to live migrate CS1 & CS2 to CS3
i checked & verified that the cluster service is running , having constrained delegation ,firewall is off,antivirus is off
Following Error is Recorded at cluster Manager
Event id : 1205
Cluster resource 'Virtual Machine CS-FileServer' of type 'Virtual Machine' in clustered role 'CS-FileServer' failed. The error code was '0x2' ('The system cannot find the file specified.').
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster Manager
or the Get-ClusterResource Windows PowerShell cmdlet.
Event id : 1069
Cluster resource 'Virtual Machine CS-FileServer' of type 'Virtual Machine' in clustered role 'CS-FileServer' failed. The error code was '0x2' ('The system cannot find the file specified.').
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster Manager
or the Get-ClusterResource Windows PowerShell cmdlet.
Hi All i have a question, hope that you can help me.
My domain have 2 site. Each site have 3 mailbox server.
This morning at 1 AM, mailbox database active move from HQ site to DR site because of network issue.
But at 3 AM, mailbox database active move again from DR site to HQ site automatically.
This is the first time i realize this act.
Can somebody explain to me what happen to my environment?
Why system can move mailbox database active from HQ site to DR site and otherwise?
Is it related with network issue?
Thanks for your help!
Best Regards,
Henry Stefanus