2012 R2, NLB and Multicast IGMP
Hi all,This is my last attempt to get NLB working before I throw in the towel :)Set up:2012 R2HP-1910 gb switchHyper-V Gen 2 nodesConfigurationEach node has two NICs, same subnet (192.168.30.x VLAN...
View ArticleWitness Disk online pending for long time server 2012 R2
HiI have a two node cluster, which uses shared storage provided by StarWind (a virtual SAN which runs on the local storage of the servers) there is one CSV and one Witness disk. Everything in the...
View ArticleRe-installing Hyper-V 2012 R2 cluster node
We have a four HP BL460 Gen8 servers acting as a part of Hyper-V Cluster, running Windows Server 2012 R2 Datacenter.Storage is provided by two node 3PAR StoreServ 7400.All network and fc connections...
View ArticleHow can I share subfolders?
HelloI need to share one folder per user.In a cluster over Windows server 2003 I had the possibility of configuring an option to share subfolders so I can map to each user the subfolder without having...
View ArticleCluster Resource IP Conflict
Hi,I have 2 node windows cluster 2008 R2 Cluster resources are offline due to Cluster resource Ip conflict.Windows has detected Ip address conflictAnother computer on this network has the same IP...
View ArticleHyper-V Failover Cluster Migration
We currently have two Dell VRTX boxes, one in production, and one not (yet). The new one is running Server 2012 R2 and the production system is running Server 2012. I have read all of the...
View ArticleCan't add Hyper-V 2012R2 Node
I've recently upgraded my 2008R2 cluster to 2012R2, which has been one problem after another. I'm at the final stages trying to add my last node into the cluster and it's failing. Right now I was...
View ArticleNew LUN Takes A long Time To Format and Errors Out
Good afternoon,<o:p></o:p>I have a Hyper-V Cluster composed of 4 nodes and these nodes are able to access multiple CSVs (14 in total). I recently requested a new LUN (LUN 15)to be...
View ArticleGuest Clustering - windows 2012r2
Hello ,Below error is observed while validating the cluster. Any help is highly appreciated.physical disk e4352cf does not have the inquiry data (SCSI page 83h VPD descriptor) that is required by...
View ArticleClustered tiered storage spaces - no tiering report
Just getting started clustered sofs spaces. I am interested to see the details on the storage tier report to see what has been moved and how much hot data I have so far. I appended the Storage tiers...
View Articledisk failover works only in one direction winserver 2012R2
I have been banging my head against the wall trying to figure this out...I have a cluster with WS2012R2 The cluster is on 2 HP DL360 G7 all latest rom drivers etc..Connection to the disks is via emulex...
View ArticleIs CIFS Share in Netapp Filer supported as File Share Witness?
Hi All,I'm currently setting up a Windows 2008 R2 Cluster and I'm having a hard time making a CIFS share work as a File Share Witness. Is this a supported configuration?Thank you!adlpena
View ArticleCluster Aware Updating - Failed to restart - The RPC Server is unavailable
I have a 3 node Windows Server 2012 R2 Failover Cluster, and I'm having trouble getting Cluster Aware Updating to work properly. I have been able to successfully apply updates that do not require a...
View ArticleFailover Cluster Manager is not performing failback of VM's
I have a 2 node Hyper-V Cluster setup in my environment. Currently I have 8 VM's with 4 on each Hyper-V server.Each VM is setup to failback immediately tot he most preferred owner, however I have not...
View ArticleNew SMB shared folder cannot be created. The object already exists.
Hi Tried to create a new shared folder on a drive and got the message " New SMB shared folder cannot be created. The object already exists." This is a Windows 2008 Cluster. log has this entry:[RCM]...
View ArticleNLB nodes remain in a converging state indefinitely? Server 2008 Standard R2...
I'm a newbie to NLB. We have just two identical servers in the NLB, a pair of nics, and unicast mode, being used as web servers. Let me know if you need additional info and what it may be.What I'm...
View ArticleSQL2012 sp2 Enterprise Cluster Install problem - Updating permission setting...
HiNew Win2012R2 2 node physical cluster. Receiving an error message(never seen before) during the SQL2012 installation on the first physical node -The following error has occured:Updating Permission...
View ArticleHow to get information about cluster disk using powershell
HiHow can I list all cluster disks in my Hyper-V cluster using Powershell? I see two cluster disk "Cluster Disk 1" and "Cluster Disk 1" in my cluster management console but I would like to see them...
View ArticleFailover cluster server
We have a 2 node cluster both on 2012, they were both working fine until a restart where one of servers started becoming unresponsive, when connected remotely or directly on the server you could use...
View ArticleMulti Site SQL High Availability group
Hi,We have our primary Data Centre where we have 2 MS SQL 2012 Enterprise Servers and 2 SharePoint 2013 Enterprise servers. We have SQL High Availability group implemented on our primary Site (Site...
View Article