Failing "List Services Information" Cluster validation test
HiI'm building a 2 node Windows 2008 SP2 Cluster. I've setup the SAN Disks, NIcs etc and am running the cluster validation tests. However this always fails on the "List Services Information" Test with...
View ArticleWindows server 2012 Datacenter Hyper-V Cluster + mixing HP Proliant DL380 G7...
I've heard that with Windows server 2012, the requirement for similar hardware for the cluster nodes is not as strict as it was before. I have a 3-node Windows 2012 datacenter Hyper-V cluster, all 3...
View ArticleSQL Server 2012 Cluster installation is getting failed
When trying to install sql server 2012 Cluster installation enterprise edition on windows server 2008R2 SP1 enterprise edition,getting the below error at the end of the installation.The cluster...
View ArticleHyper-V over SMB SOFS network configuration
Setting up 2012 R2 SOFS cluster to house Hyper-V data for the first time. I have 1 pool and 2 tiered spaces setup on the cluster. The 2- Dell 720 have 2 - dual port RDMA nics, Data-On Jbods. 4- 1Gb...
View ArticleWSFC vs MSFC
Hi Cluster Experts, i know it can be little odd to ask, but i am really confused. as per my understanding WSFC is just the latest version of MSFC. which is available in windows server 2012, Please...
View ArticleCluster network name resource 'Cluster Name' cannot be brought online. Unable...
Hi,I've got a functioning Windows 2008 R2 cluster. Node 2 is throwing this error every 15 minutes. The cluster validates OK. I've compared permissions on the cluster name object and it looks like...
View ArticleCluster service not starting after reboot - The system cannot find the file...
Hello,I will describe the current situation, the lab and the cluster log. I'm looking forward to any hint to get the cluster running again.THE SITUATIONI am working on a cluster resource dll, porting...
View ArticleWindows 2012 Failover Cluster
Having a problem creating 2 node cluster. I launch FCM, begin the process of adding nodes. Node 1 goes in fine. Node 2 gives an error which is, "unable to connect to xxx.xxxx.com via WMI. This may...
View ArticleWindows 2012 R2 File Server Cluster Storage best practice
Hi Team,I am designing Solution for 1700 VDi user's . I will use Microsoft Windows 2012 R2 Fileserver Cluster to host their Profile data by using Group Policy for Folder redirection.I am looking best...
View ArticleHow to properly configure NLB cluster in Windows 2008
Hi, I have just tried to configure 2 node Windows 2008 NLB cluster and I run into problem.Until now I have successfully installed Windows Server 2003 NLB clusters. I used 2 nic per node and unicast...
View ArticleWindows 2008 r2 Cluster not starting - "unable to create security manager...
Hello, following a power outage, we got a serious cluster error preventing the start of the cluster.We are trying to interpret the only four lines the cluster.log generates...
View ArticleONE NODE PHYSICAL AND ONE NODE VIRTAUL
HIi want to build an sql cluster and share point cluster in one node physical and one node virtual , hyper-v server is windows server 2012 r2 , i can directly assign shared storage from SANplease let...
View Articlehyper v cluster
hii am getting a cluster validation warning below - 8 node cluster NETWORK DESIGHN1- WINDOWS NETWORK,2-HB NETWORK,3-LIVEMIGARTION, 4-MANAGEMNET NETWORK 5- VM NETWORK (TEAMED 3 NIC )Node...
View ArticleHyperV Failover Cluster - twice some vms lost network
So i run a 4 node Hyper V Failover Cluster and twice now.... out of months of operations out of the blue on a node a portion of the VMs just lose network access(this has happened on two different...
View ArticleLocal Cluster, Remote Domain Controller
Hello,This is more so a general 'what if' type of question. If we create a Server 2008 R2 local cluster with local storage, but have the Domain Controllers at a remote site and the WAN link...
View ArticleIs clustering possible with this setup.
Is it possible to use Windows Server 2012 Data Center2 SuperMicro AS-2022G-URF4+ R withRAID CARD SUPERMICRO|AOC-USAS2-L8i and SAS drives for a failover cluster for Hyper-VAt this moment using mirrored...
View ArticleNetworking load balancing - problem with backup network
The thing is, that if I setup hosts in cluster to use backup Network, the vitual IP and FQDN will not answer. If I utilize domain Network for clustering, it works okay. I´m not sure, what is the best...
View ArticleUnable to Validate a Cluster Configuration. The operation has failed. The...
There is an error in XML document (5, 73). Attempt by methodMicrosoft.Xml.Serialzation.GeneratedAssembly.XmlSerialzationReaderClusterPrep.Config.Read4_As...Bolean) to access...
View ArticleCluster Validation fails with multiple networks incl. packet loss
Hello all,we have a 4 node cluster running on Windows Server 2012 R2. There are 3 networks running on different subnets, let's say 192.168.0.0 for Management, 192.168.100.0 for Live-Migration and...
View ArticleFailing "List Services Information" Cluster validation test
HiI'm building a 2 node Windows 2008 SP2 Cluster. I've setup the SAN Disks, NIcs etc and am running the cluster validation tests. However this always fails on the "List Services Information" Test with...
View Article