Domain rename and Hyper-V Cluster
Hello, I'm planning an Active Directory Domain rename. We have also a cluster with Hyper-V 2016, I've tried to search about this operation but somewhere it seems that's supportted and somewhere they...
View Article2016 vs 2012 failover clustering - test disks
I'm looking for a logistical answer, or maybe I'm doing something wrong.While setting up a 2012 failover cluster, it would take the disks offline and test them. I'm setting up a 2016 cluster and the...
View ArticleFailover cluster node show quarantine of windows server 2016
we have implemented server 2016 node hyper-v cluster . our one node show quarantine we have run start-clusternode cq but the problem is same please help me.
View ArticleAutomatic cluster failover on disk write problems (ID 50)?
Hello,I am currently running a 2k2R2 cluster with shared storage, mostly as a file share. Yesterday the HBA on one of the nodes went bad and showed intermittent connectivity. I would have guessed...
View ArticleRun different version VMs on Hyper-V Cluster and Dell R620 run Windows Server...
Hey Guys, I need your help to explain my questions:1) Dell PowerEdge R620 is not certified for Windows 2019, but my hardware meets system requirements. Will this do?2) Do I have to setup the cluster...
View ArticleFailover Cluster - Failed to access remote regitry on 'SERVERNAME'
Hello community,I am trying to create failover cluster on Windows Server 2016, I create 3 virtual server for testing, in one of the server I set up the DNS and I tested and is fine. But when I try to...
View ArticlePermission problem updating Functional Level 2019
I just finished upgrading my 2012 R2 servers to 2019, I have a failover cluster configured on H1, the functional level says 9.8, I want to raise it but get a permission...
View ArticleWindows file server clustering - physical 2008 Ent R2 and 2012 or 2016 VMware...
I currently have two physical Windows 2008 Ent R2 file servers clustered. I plan on either adding a third VMware Windows server into the cluster or replacing one of the physical servers with a VM. Due...
View Articlechange possible nodes of cluster role
Hi,I have a 2 node windows failover cluster on windows server 2012r2 (NOT a hyperv cluster).I am interested in changing a specific role to only be able to run on a specific node (I know that in a 2...
View ArticleNetwork Load Balancing for terminal servers
Hi every one I installed two terminal servers host A and host B, then I installed NLB features on this servers and created cluster with name RDS.test.local, NLB work properly in my test lab I have 5-6...
View ArticlePublic IPv6 address
Hi I've been trouble shooting an issue with a hyper V failover cluster and I've been skimming through the network config for the VM hosts.It's a 2 node cluster and comprised of 2 X dell FC630's in an...
View ArticleCreating a new Failover Cluster
Can anyone help me with the following error:The node failed to join failover cluster 'SQLCLUSTER' due to error code '3221225485'.The validation tool shows everything green. Here's the bottom of the...
View ArticleIPv6 VM Property in Virtual Machine Manager
Hello All,I have a 3 node 2016 Hyper-V Failover Cluster running 20 VMs. When looking at the Networking tab at the bottom of VMM (not the individual VM network adapter settings), five of the VMs display...
View ArticleHyper-V 2012 Live migration fails, quick migration works
Hi.My Environment is two 2012 Hyper-V (Datacentre) servers, clustered. These servers have different hardware but the network cards are named the same. When I do a quick migration it works perfectly but...
View ArticlePossible clients for Infrastructure Scale-Out File Server in Windows Server...
Windows Server 2019 has a new Scale-Out File Server role named Infrastructure, which lets us provide continuously available shares from volumes in a hyper-converged S2D cluster. We can then use these...
View ArticleServer 2019 Failover Cluster
I am setting up a Hyper-Converged Infrastructure and I see several old posts about not putting the DC on the failover cluster as it requires AD services to start itself. However those old posts refer...
View ArticleNLB & ARR - Windows Server 2012 std and 2016 dtc
I have a question about the compatibility with Server 2012 std and 2016 dtc.i have 1 ARR without NLB who is running on a Server 2012 std. i also have a ARR without NLB who is running on a Server 2016...
View ArticleUninstalled failover clustering from server role
Have uninstalled failover clustering from server role before destroying cluster. when i try to bring disk online in disk manager which allocated for cluster, getting error below."The specified disk or...
View ArticleReplication high watermark
HI,Can anyone help me undestand Replication water mark and how this works ?is that same as high water mark vector in replication ?
View ArticleSwitch that becomes isolated. Node goes offline.
HelloI have four nodes that is configured as a set switch with two nic ports.To this I have two switches.If one switch fails all node remains online but if one switch becomes isolted but is fully...
View Article