netft.sys is the cause for the bugchk blue screen on the server Windows 2008...
Hiwe have the server geting rebooted by a bugchk error for netft.sysPlease let me know if we have any fix for this issue. i am not sure wht is causing the issue on the serverthe server is windows 2008...
View ArticleConfigure NLB on Hyper-v
Hi All,I had run into problem while configuring NLB on win 2012 R2 on the Win 2012 R2 Hyper-vThere were two server server1 and server 1 with 2 NIC each on the servers Public and NLBServer 1 Pubic NIC...
View ArticleClik here to view.
Cluster CSV had errors, failed over, I see two volumes appear under CSV one...
So, we've been having issues with one of our clusters. Yesterday in the evening when no one was working it seems like a bunch of VMs went down. I found some errors in a couple event logs that show it...
View ArticleServer 2012, Hyper-V Cluster point moint failure
I have a 6 node Server 2012 Hyper-V cluster. Each node was a fresh install with all local drives formatted and repartitioned during OS install.The first 5 nodes went great, but the 6th node is causing...
View ArticleMulti site file server fail over cluster Windows 2012
Any help is welcome.<o:p></o:p>I'm looking into building a multi-site file server failover cluster, using Windows server 2012 R2 STD. For some unknown reason I can't find detail information...
View ArticleCAFS for General Use
I am wanting to utilize the File Server for the General Use role in Fail Over Cluster Manager. I have successfully created the disk on the SAN and role. The disk is online. However I cannot bring the...
View ArticleW2012R2 - can you create file shares on a CSV?
We have an end user who created a file share on his W2012R2 Hyper-V Cluster Shared Volume (CSV C:\ClusterStorage\Volume2\SharedFolder) directly without using the File Server Role CAFS. The Hyper-V host...
View ArticleHyper-V HA Orphaned Files Search
First, I apologize if this is in the wrong section as I was debating between this category or Hyper-V.I currently have Hyper-V with a Failover Clustering enabled between 3 VMHosts and 3 CSVs on a SAN....
View ArticleEvent Log for migrating VMs
Hello,I have a two node hyper-v host cluster and I'd like to know when the last time a VM was live migrated from one node to the other. I've looked through the failover clustering logs and hyper-v high...
View ArticleClustering with only one VLAN
Ran across and interesting situation. 4 node 2012 R2 Hyper-V cluster. The cluster uses a direct connection to shared storage so there is no network needed for that. There are two subnets: one for...
View Article2012 NLB (multicast) times out after several minutes
Hi All, We have two 2012 servers that are a part of an NLB cluster using multicast. We are using Cisco networking equipment. Each VMware VM has a single NIC configured.We are finding that after a few...
View ArticleRunning a Clustered Scheduled Task as a user
Hi all,Can anyone tell me if it's possible to run a clustered scheduled task as a different user, like I can with normal scheduled tasks? From Powershell i'd specify a -Principal object with a normal...
View ArticleEvents incase CSV Disk space full
Hi,I have a two node SQL fail-over cluster on Windows Server 2012 r2 & sometimes the CSV Disk space is getting full (either on Backup Disk or on DB Disk). from where can i check if the space is...
View ArticleHyper-V cluster not able to migrate VMs after windows updates
I have two hosts in a Win 2008 R2 Hyper-V cluster. I moved my VMs to one host while I installed Windows updates on the other host. During the updates it also tried to install a Dell System Device...
View ArticleHow to move CSV to another Cluster
The previous IT company setup a Scale Out File Cluster within the main Hyper-V 2012 R2 Cluster. The File Cluster has a CSV share that we would like to move to a new CSV on the main Cluster. We would...
View Articledisk failover works only in one direction winserver 2012R2
I have been banging my head against the wall trying to figure this out...I have a cluster with WS2012R2 The cluster is on 2 HP DL360 G7 all latest rom drivers etc..Connection to the disks is via emulex...
View ArticleNew SMB shared folder cannot be created. The object already exists.
Hi Tried to create a new shared folder on a drive and got the message " New SMB shared folder cannot be created. The object already exists." This is a Windows 2008 Cluster. log has this entry:[RCM]...
View ArticleMulti-site cluster with one node in each of two sites
I think I know what the answer will be, but my question is which is the best quorum configuration? I have a 2 node cluster with one node in each of two sites and a replicated SAN between the sites. I...
View ArticleCluster does not fail over after 4 service failures - 2012 R2
I'm having an issue with a new failover cluster that I just created where I can kill the clustered service 4 times through the task manager (or simulate failure) and the service and role are then...
View ArticleKB3093571 doesn't do what it was originally stated to do and now KB looks...
I downloaded Hotfix KB3093571 last week hoping to gain the ability to replicate VMs that were utilizing shared VHDX. After installing the hotfix I still receive an error message via Failover Cluster...
View Article