print cluster - want to forward the spool file?
Hican anyone give me an idea, really not very experienced, we have a two node print cluster running on windows server 2008, we want to forward on the spool file to another printer, the spool file...
View Articleno disks suitable for cluster disks were found
I have a 2 node cluster and I added a 50GB volume to both nodes. but in failover cluster manager, adding disks does not show the disk.I see the disk in disk manager
View ArticleSharepoint Website responding very slow, using windows server 2012 Network...
Hello Team,Greetings for the day!I have 2 Windows server 2012, with Network Load Balancing role enabled on it, on both the server sharepoint 2010 R2 (Sharepoint Farm) is installed. I have enabled...
View ArticleProcessor Information for Lizard
I've just put together a small cluster, with all nodes using Intel E5-2665 cpu's, and all running server 2012 R2. I'm trying to benchmark it using Lizard, but it is asking for information on the...
View Articlequorum failure scenario question
Hello TechNet friends,I have a scenario that happened yesterday that leaves me stumped and I am not sure in which direction to go.2-node active/passive 2008R2 file cluster (Node 1 & Node 2)Nodes...
View ArticleNode being removed from Windows Server 2012 R2 cluster
Windows Server 2012 R2 multi-site cluster with 5 nodes. Node 1 (at the main site) fails multiple times a day with the same issue in the cluster log as shown below. All the other nodes log missed...
View ArticleKerberos target resolution error after cluster rename
I have a two node Windows Server 2012 running Exchange 2013 cluster which went through a name change on the primary cluster resource. The DNS and computer entries came online with the updated name...
View ArticleInternal netbios traffic on WSFC 2012
All hello. Current configuration: SQL Server of group of availability (AG) 2012 on Windows Server 2012 consisting of two nodes is developed. On each node two network interfaces, one for public access,...
View ArticleNetwork Drops for 30 seconds During Hyper-V Live Migration
I have 3 physical Hyper-V hosts setup with clustered storage. I disabled VMQ because I was getting errors when trying to do live migrations. I have also ran the network portion of the cluster...
View ArticleUnable to validate Server 2012 Failover Cluster - Node communication problem.
I thought I had posted this, but the system appears to have eaten it. I will try again.I am setting up a 2-node Server 2012 Failover Cluster. I have installed the tools on each server, and I have...
View ArticleNetwork Configuration for SOFS & Hyper-V Cluster
Hello,Nice opportunity for a good laugh here..potentially.Looking to deploy an SOFS and HV cluster over the coming summer. Going through the network configuration and have come up with the following...
View ArticleOption "Continuous Availability" on File Share on 2012 R2 "General Use" File...
Have a "General Use" Fileserver clustered on two 2012 R2 Cluster Nodes. When creating file shares in the failover cluster manager, I have the option to tick "Continuous Availability" in the settings of...
View ArticleFailover Cluster Manager shows node down/wrong owner
I'm getting up to speed on clustering and ran into something I can't figure out. Any help would be appreciated!The Hyper-V hosts are running Server 2008 R2. The VM's are running Server 2012...
View Article2012 R2 Guest Cluster Network Failure
We have a 2 node guest cluster (2012 R2) using a shared VHDX located on a CSV providing resilient File Server services and it seems to work well....most of the time.We've had two instances lately where...
View ArticleRecovery steps for a failed single-JBOD SOFS cluster
Just wondering here.So a single, sole JBOD goes down which is connected to 2 SOFS nodes.What are the options for quickly spinning up the VMs that resided on the JBOD?The Hyper-V cluster cannot access...
View ArticleCluster Aware Updating, WSUS, and SCCM
Howdy,Wasn't sure where to post this so hopefully it works OK here.We use SCCM to handle pushing patches to all of our workstations and servers. However, we don't have it push to Clustered machines...
View ArticleNeed step by step instruction to install sql server 2012 failover cluster
We need to install sql server 2012 failover cluster within next 12 hrs. If some one send us step step instruction for it would be nice help.I am new to sql cluster installation. We need help to...
View ArticleQuery on Multi-subnet Failover Cluster Setup
I have setup Failover Cluster Instance on 2 nodes with Windows Server 2008 and SQL Server 2012 running on a SAN storage with "Node and Disk based Quorum", DTC and public and Private IP...
View ArticleClik here to view.
Issue with setting up a File Server Role error 1254,1205 and 1069
Hi Everyone I am current building a new 2012R2 file cluster to replace our 2008R2 file clusteron each node (total of 3) I have enabled the following roles and features 2 Nic Internal and...
View ArticleFailover Cluster on S-2012 R2 - CNO Issue
Set up is with 2 Nodes (6 VMs per node running from clustered storage). I have a CNO in the Active Directory & registered in the DNS, within its security tab it has full control to its named object...
View Article