VM's go BSOD when changing CSV owner
3-server-cluster, WS 2008R2 x64, Hyper-V. Everything works as it's surposed to, live migration too, but when I change the owner of cluster shared volume (only 1 volume exists) the VM's all get BSOD....
View ArticleNLB cluster logic?
Hi,I have a rather fundamental question about nlb clustering with the risk of sounding a bit stupid. I have a 2008 r2 two-node nlb cluster using multicast cluster mode. Its NOT using a separate...
View ArticleAdding a node to a 2012 Hyper-V Cluster on Dell VRTX with a PERC H310 Shared...
Hi,we have now tried to install our 2nd Dell VRTX with 2 nodes and 2 CSVs as 2012 Hyper-V Cluster.Everything went fine, until one of the nodes got a hardware issue.We evicted it from the cluster (works...
View ArticleClik here to view.
Unable to Create new c;uster windows 2012 Hyper-V Cluster
I am unable to create new cluster windows 2012Hyper-v, the only error I get is warningI end up getting this error Unable to successfully cleanup. An error occurred while creating the cluster and the...
View ArticleClik here to view.
Event ID 1212 - Cluster network name resource 'Cluster Name' cannot be...
Hello,We implemented a Windows Server 2012 hyper-V cluster recently. All was working correctly. However we decommissioned one of our 2003 Domain controller recently. Since then whenever I try to move...
View ArticleMultiple Event ID's 4738 and 4724 on new Windows 2012 Hyper V cluster
We just setup a two node Windows 2012 Hyper V cluster. Everything is working correctly, but in the Security log on both nodes, we're getting Event ID's 4738 and 4724 every 3 minutes for the built in...
View ArticleFix Hyper-v Storage location
I need to correct a mishap in the placement of a VM on a 2012 failover CSV. A vm nameddc4 was placed in a folder...C:\ClusterStorage\Volume1\dc2I need to either rename the folder on the csv from...
View Articlecluster failure
hello,I had an two node iis nlb cluster which failed in a strange way. both nodes were able to respond internally to web requests.while the cluster was active with both systems, there was no activity...
View ArticleMigration from IBM DS8100 to IBM DS8870
Hi,Migration from DS8100 to DS8870 will be done by copy services (storage level migration), once the data is migrated / copied , We need to remove the DS8100 luns from the server & assign DS8870...
View ArticleCluster resource Virtual Machine Trusses has failed
About once every two weeks host2 server reboots and it moves the VM server over to host1 likes it should and this is the error we get.Log Name: System Source: Foundation Agents Date:...
View Article2012 R2 Cluster - Issues creating cluster
New Dell VRTX server with 2 server blades. Installed Server 2012 R2 on both blades and all working ok.Ran the 'Validate Configuration' wizard and all ok apart from Storage Spaces, which we won't need...
View ArticleFailover cluster - correct placement of DC with FSMO
Hi,I have been searching all over the net but am unable to find any indication of the best way to have my specific infrastructure configured.Current configuration:7 sites with one of those being Head...
View ArticleUnable to Validate a Cluster Configuration. The operation has failed. The...
There is an error in XML document (5, 73). Attempt by methodMicrosoft.Xml.Serialzation.GeneratedAssembly.XmlSerialzationReaderClusterPrep.Config.Read4_As...Bolean) to access...
View Article2012 r2 failover cluster add storage disk fails
Hello,I am hoping for some help here, I have searched the forums/web and can't come up with the reason for my disk failure. I am working on 2012 r2 virtual servers sitting in a vmware environment....
View ArticleRelocating SQL 2008 R2 failover cluster
Hi,I have few days before figuring how to do this. We are physically moving a 2 node failover cluster to a new datacenter . The storage where the shared disk resides isnt going anywhere. Instead ,san...
View ArticleHow to change the IP address of a Cluster and it's resources - WIndows 2008 R2
Hi I have a few clusters that need to be re-ip'd since we're moving from one location to another and the Network IP addressing has changed. can somone provide the recommended steps to change the IP...
View ArticleContinuity management Suggestions for Cluster environment
I would like to know the possibility of setting up a Cluster environment for nodes(servers) located in different data centers.If this is possible, what are the things i have to concentrate in like...
View ArticleClik here to view.
server 2012 R2 failover clustering
I am setting up a new domain with 2 windows server 2012.I have the first server setup for AD, DNS and DHCP, this is the primary DC.I have the second one is joined to the domain and promoted to a DC.I...
View ArticleHyper-V Clusterstorage inaccessible?
I've had our cluster up and running for 6 months or so, everything has eben going smoothly. This morning things started behaving very strangely, starting with an event: Cluster Shared Volume 'Volume11'...
View ArticleHow to set up a compute node only application network
I am setting up a compute cluster using HPC Server 2008 R2 cluster manager and have my compute nodes isolated on a private network, to which the head node is also connected, but I also have a...
View Article