Stuck on joining state
Hi guys i have 2 node and both went down due to some issue.Before rebooting my node1 was the primary node and node2 was the secondary node.My node1 was having issue rebooting but my node2 was fine upon...
View ArticleActive Directory Domain Services: Best practice for 3 Domain Controller...
Hello. I have some clarifications.1. What would be the best practice for an environment with 3 Domain Controller Servers when i want it to be high-available?2. If the Primary DC Server is down because...
View ArticleClik here to view.
Error Cluster Aware Update(CAU) in Windows 2012 FO Cluster
Hi,I have configured Self-updating CAU for 2 Nodes Windows 2012 FO Cluster . I use "Microsoft.HotfixPlugin" of using insatall hotfix at cluster nodes. In my Lab, 3 Windows 2012 Servers - 1 AD &...
View ArticleEvict node failed
Hi, what is the procedure for removing a cluster hyperv (Mix 2012R2 and 2016) node that can not be connected to the cluster again? Thank you.
View ArticleUpdating hyperv cluster
Hi,I know it's not recommended to upgrade the OS, okay!if we choose to upgrade the hyperv cluster nodes with 2012 R2 to 2016, what are the recommendations? - Remove the cluster node; - Remove...
View ArticleCluster upgrade same computer name and ip
Hello All,I am about to start a cluster upgrade from 2012 R2 to 2016. There are a lot of good guides out there and the process seems strait forward. I would like to know if it is ok the keep the same...
View ArticleServer 2016 MSMQ cluster role - bind to multiple cluster IPs
We have a two node cluster (Server 2016 datacenter) where I've added the MSMQ cluster role. I have two networks this cluster can talk to, 192.168.0.0 and 10.10.0.0. The message queuing role has both...
View ArticleWindows Admin Center: Missing sddcres.dll
Hello, I have recently spun up a 3-Node failover cluster with S2D and Hyper-V roles installed, configured, and actively working. Windows Admin Center is pointing me to an article that states it relies...
View Articlenetft.sys is the cause for the bugchk blue screen on the server Windows 2008...
Hiwe have the server geting rebooted by a bugchk error for netft.sysPlease let me know if we have any fix for this issue. i am not sure wht is causing the issue on the serverthe server is windows 2008...
View ArticleClik here to view.
Some cluster networks with unavailable status
Hello. When we "mounted" the Cluster Failover with Windows Server 2012 R2, and all Networks were "Up", however we realized that we were not able to do Live Migration, and we checked into the Cluster...
View ArticleProblem running Update-ClusterFunctionalLevel on Server 2019
HiI have in-place upgrade a 2 node SQL cluster (from Server 2016 Std. to Server 2019 Std.). The whole process worked as expected.Now I want to run Update-ClusterFunctionalLevel, but it is returning the...
View ArticleZero Downtime File Server - Would this setup work?
Hello everybody,I was given the task to plan a redundant file storage environment that can compensate failure of any component without service interruption. This is a field I have little experience...
View ArticleWMI Equivalent of powershell Start-ClusterResource and...
Hi,I want to use these two commands. 1) Start-ClusterResource and 2) Move-ClusterVirtualMachineRole for first starting the VM and then moving to the active host.If I move VM without starting it, it...
View ArticleClik here to view.
How to automate actions based Cluster Validation Test results?
In windows clustering you can run a "Cluster Validation Report" either from the Cluster Administration Console or from PowerShell using Test-Cluster. However, the output is an .htm file, which isn't...
View ArticleGet-Volume returns all volumes within Windows Failover Cluster instead of...
Hello all. This is my first entry in the forums, so apologies if I miss something or have this in the wrong place. I am using the Get-Volume command in PowerShell to return all the volumes located on...
View ArticleCan I migrate a VM from another node to current active node?
HiIs it possible to migrate a VM from another node in cluster to currently active node of hyper V Cluster? using WMI Providers.Any clue is highly appreciated.Thanks
View Articlecluster shared volume has entered a paused state because of (c000000e)
I am running a windows server 2012 r2 hyper-v cluster with via datacore attached jbod storage (via iscsi).Situation: within the last 6 month this situation occured 3 times. It happened on different...
View ArticleClik here to view.
Cluster-Aware Updating Readiness "Errors"
I have a two-node Windows Server 2012 failover cluster. The Windows firewall is disabled on both nodes.When I log on to one of the nodes (bcs-vmhyperv2), and run the Cluster-Aware Updating tool to...
View ArticleClik here to view.
Event ID 1212 - Cluster network name resource 'Cluster Name' cannot be...
Hello,We implemented a Windows Server 2012 hyper-V cluster recently. All was working correctly. However we decommissioned one of our 2003 Domain controller recently. Since then whenever I try to move...
View ArticleHyper - V Cluster Networking
Hi ,I have setup a Hyper-V Cluster with 2 servers , researching a lot it is recommended to have converged network for best practices.I have 4 x Physical NIC on each servers - Created a NIC team with...
View Article