NLB RPC Errors causing server to need reboot
Hi Technet,We currently have a 4 node Windows 2008 R2 NLB with multiple NICs in each and every so often everything stops working. The issues we have seen are listed belowThe NLB manager is unable to...
View ArticleKeep Repair CNO to Live Migrate VM
I've 2 node cluster -Win 2012 Hyper-V. Cluster is working fine and can live migrate without any problem. But after a while (few days) saw error message on dashboard mentioned CNO -kerberos security...
View ArticleHDisk for clustering
How can I make my HDisk1 on each node acceptable for clustering? I created a cluster with 2 nodes, each has 2 Hdisks Hdisk0, Hdisk1. HDisk0 is the boot disk with the OS and all data.I want to use...
View ArticleSOFS hardware setup advice please
Hello,I'm looking for some advice on setting up a SOFS cluster, the following is what I have in mind:x2 HP DL380p servers running Server 2012 Datacenter and HyperV, a 10Gb network card in each10Gb...
View Article"The parameter is incorrect" error when creating mount point in Server 2008...
I am receiving the error "The parameter is incorrect" when attempting to create a new mount point in an existing Server 2008 R2 2-node cluster. This cluster hosts four SQL 2008 virtual servers and I...
View ArticleClustered CA failover but the CA appl not started
After changing the Clustered CA servicename, and testing the CA failover, I see that both the storage and the CA servicename failed over successfully but the CA apllication itself did not start, unless...
View ArticleFailovercluster BSOD
We just got our second BSOD on a failovercluster box in 2 weeks. The setup is 3 server 2012 boxes (dell r610) with a 10 gig nic for san and the onboard for the public.the minidump shows netft.sys as...
View Article3 Nodes SQL 2008 cluster failover scenario.
I want to create a 3 node cluster of SQL 2008 over windows 2008 R2 cluster.If I use Majority Nodes with Disk as the quorum then:1) Cluster will continue working after the failure of 1 Node.2) Cluster...
View ArticleWindows versions acceptable in a Windows 2008 R2 failover cluster.
Does MS support different versions of Windows in the same cluster? For example, if I have an existing Windows 2008 R2 cluster with two 2008 R2 nodes in it and I want to add a new node, can I add a...
View ArticleClik here to view.
Networking issue failover cluster
I have network issues and a lot of resources failing in a two-node failover-cluster (2008 R2).Here are a few observations. Only one node can be active in the cluster at the same time. The logs are...
View ArticleLarge amount of WRITE data causes 2k3 cluster to failover
All, I have a 2 node Windows 2003 Server Failover Active/Passive cluster. We have 2 HP DL380 servers with 3Gb RAM, connected via 4Gbps Fiber channel HBA cards directly connected to a HP P2000 storage...
View ArticleClik here to view.
Disk in Cluster accessed by more then 1 Server at a time
I have a file server that I was using to backup 2 HV hosts too. The issue was since it was a shared drive it would only keep 1 copy of the backup at a time.In order to keep multiple copies I created a...
View ArticleClik here to view.
Unable to create Guest Cluster VM ws2012...fails on "forming cluster..."
Hi,I want to set up a guest Virtual Machine cluster on a Hyper-V(WS2012) Cluster. The guest VM Cluster will use as quorum a fileshare. I've built 2 guest VM with WS2012. They are on the same virtual...
View ArticleUnable to start cluster service in passive node in windows 2003 cluster
Hi,we have two Node windows cluster (win2003),active node cluster service is up and running.we are unable to start the service is passive Node.when we are trying to start ,we are getting unable to...
View Articlewin2008 fail over cluster disk validate failed with: disk has a persistent...
i have a StrogeTek D280, and try to create a two nodes win2008 server fail over cluster, the validate failed with below message. what can i do to resolve this? i am using MPIO of STK. anyone can help?...
View ArticleCreating share in cluster wih 2 noeds
HiI have two Windows 2008R2 in clustering with all disk on SAN. I need to create Hight avaibility share.I create a access point. Create a object and ip address in the network. I define a share and the...
View ArticleWindows Server 2012 Hyper-v Cluster (2 Nodes) - Cluster network name resource...
Hi We've started receiving the following error after a month or so of clustering bliss..."Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the...
View ArticleClean AD
Hi!I need to clean my Windows 2008 AD from a Windows 2012 Test Cluster. The Cluster Service has already been removed from the Clustered Servers.Any Suggestions?Thanks.
View ArticleNLB CLUSTERING IN WINDOWS SERVER 2008 R2 PACK 1
DEAR ALL,I have one server 2008 r2 pack 1 with two nic . I want to connect two link to a d'link switch DGS 3120 SERIES for increasing data speed.so how can i configure this in both server and switch....
View ArticleWindows Server 2012: SMB share with transparent failover
Have a nice day to all!I have 2 HP Proliant DL380P Gen8 servers containing 8 x 1TB disks (with P420i HP Smart Array RAID Controller) in each server.So, there are 2 arrays on every server:1. 2 x 1TB in...
View Article