2012 R2 Hyper-V cluster nodes hang
Hi,We have a two node Hyper-V cluster. ~ once a week either one of the cluster nodes hangs during a backup (Backup Exec 2014 Vray edition) causing all VM's to restart to the other node. When a node...
View ArticleWhat does it mean to assign a volume an owner node?
I created a two node, hyper-converged deployment with Windows Server 2016 Hyper-V and Storage Spaces Direct on the same cluster. When creating the CSV volumes what does it mean to assign an owner node...
View ArticleIP for the client access point
Can someone tell me if i am doing this right, or point me in the direction of something to read on the matter?I setup a Scale-Out File server on a 2 node cluster. My question is the IP of the Client...
View ArticleCluster Validation shows missing updates on 2 nodes - but update is not...
HelloSo I ran my cluster validation and it comes up with a certain update missing on two of my nodes.I go and download the update manually and try to install it on the two nodes but then windows comes...
View ArticleHyper-V cluster - 500VM's + - clussvc.exe - CPU usage
HiWe have multiple hyper-V clusters running on 2012R2In the largest cluster, 13 nodes, 500 vm's, clussvc.exe uses about 25-30% CPU, and there is a good amount of network traffic between all the nodes....
View ArticleCluster Storage Disks vs. Pools
I'm setting up a Hyper-v Failover cluster for the first time and am unsure of when and why to put my disks into a pool or just create disks. I have (2) LUNs on my DAS. One RAID 10 with 15K drives in it...
View ArticleScheduler task should run on cluster servers !
Hi Guys, Hope you all doing good. I have payment related scheduler is running on only one server, which need to configure in Cluster level. As we need redundancy on scheduler , if one node is down...
View ArticleWindows 2008 R2 Cluster refuses to start on one node.
Hi,I'm having an intresting error on a SQL ClusterSystem is 2*Windows 2008 R2 SP1 & SQL 2008 R2 with A/P-cluster configuration.After a crash which happened by unknown reasons one of the nodes...
View ArticleEach node running a VM at the same time in a failover cluster?
Greetings.I have a 2 node failover cluster. Each node has a Hyper-V role in it. I have 2 virtual machines that i'd like to run. Currently, they are both on one node at any one time ( in case of...
View ArticleNode in cluster - status changes to "paused"
We have seven Windows 2012 R2 nodes in a Hyper-V cluster. They are all identical hardware (HP BladeSystem). For a while, we had only six nodes, and there were no problems.Recently, we added the seventh...
View ArticleBest Way to Create Two Node Cluster if 1 Node Already Has VM's
Hello Everyone,We have 2 HP ProLiant DL380 Gen 9 servers. I'm in the process of upgrading the servers from Server 2012 R2 Datacenter to Windows Server 2016 Datacenter. Each server has 20) 900 GB SAS...
View ArticleMount Points with 2012 R2 Failover Clustering
I've been reading the forum regarding how to setup mount points within a 2012 R2 failover cluster but am still confused on correct process.1) Create c:\MountPoint\MountPountName (have to create on each...
View Articlemini HA basic config
Hi,I'm planning to set up cluster with win 2012 and 2012 R2 servers. It's my first one so I'd like to get some extra knowledge before I start.Config is simple: Servers are virtualized with esxi, and...
View Articlelive migration failed - VM restarted
Dear All,I have cluster with WIndows 2012 R2 with all updates installed.When trying to migrate or drain role - some time the operation doesn't complete and in log I see next errors:Cluster network name...
View Articledownload dumcfg.exe for windows server 2003 64bits
Please let us know where we can download the dumpcfg.exe for 64bits, so we can change the disk signature of the quorum disk then bring our cluster environment back on line. Thank you very much for...
View ArticleIs there any way or command to find out cluster resource name that running...
We have below queries on MSCS1. We would like to run below cluster command from remote server. Please suggest the process. Get-ClusterResource "Disk E" | Select Name,State,OwnerGroup,ResourceType2....
View ArticleNetwork Configuration
Setting up a Hyper-v Cluster. Whats the best practice for cluster network. I have one subnet for mgmt network, 1 for IScsi traffic, 1 for VM network, 1 for Live migration and was thinking 1 for cluster...
View ArticleRKF failure - SRV2 failed to get acknowledgement from Resume Key filter for...
Afternoon,We have a Hyper-V Cluster - 2 hosts with shared storage via iSCSI and have started receiving the above error in the event log (Applications and Services Logs > Windows > SmbServer).The...
View ArticleClik here to view.
Cannot change owner on Storage Pool after upgrading one node to WS2016
We have a 2-node fileserver cluster that until now has been running WS2012R2. The two nodes have a shared JBOD with a bunch of SAS drives. There is a storage pool configured to use these drives in the...
View ArticleWitness Client failed to find a Witness Server
Witness Client failed to find a Witness Server for NetName \\SERVERNAME with error (Element not found.). Retrying in (60) seconds. These errors have recently started appearing on some of our Server...
View Article