Enable-ClusterS2D reports "No disks with supported bus types found to be used...
I'm working on a stretch cluster configuration as described athttps://technet.microsoft.com/en-us/windows-server-docs/storage/storage-replica/stretch-cluster-replication-using-shared-storage .I got as...
View ArticleScale Out File Server SMB redirection locking up CSVs
Problem - Physical hosts have HyperV running and a vhdx located in a SOFS CSV (HyperV hosts different than SOFS cluster nodes). During start up of the VM when SMB redirection occurs or when trying to...
View ArticleClik here to view.
Failover Cluster Manager snap-in error
Hey guys, need help on this one as I'm fairly new to clustering.I just built a 2-node cluster, which seems to be running OK, but when I go to the Failover Manager > Roles, I get this very long and...
View ArticleAdding new node to cluster can be done from any node?
Hi Team, I have 2 node windows failover cluster (running SQL Failover instances). I wanted to add another node (3rd node) from DR site to existing Windows Cluster. If i try from Node 1 and Node 2 in...
View ArticleHeartbeat requirements from Node that is remote
Hi Team ,We have existing 2 Node cluster, we are planning to add node 3 to the existing Windows Failover cluster in Primary Datacenter. Since 3rd node is actually from different location (and has...
View ArticleHyperV Cluster MAC Address static or dynamic
Hi,i have a hyperv cluster with 9 Windows 2012R2 Nodes and round about 200 VMs with 2012R2 or 2008R2. alle VMs where connect to 2 virtual switches. at the moment i have dynamic mac addresses.what is...
View Article"Unable to successfully cleanup" Error while configuring cluster in Windows...
I am configuring a three node Windows 2012 R2 server Failover Cluster. The cluster validation completes without any error/warning. please help to fix this errorCluster: hcleduNode:...
View ArticleSMB Access denied for Cluster Role Resource
Dear All, I have Window 2008 R2 File Server Fail over cluster which is having in Production. As part of DR fail-over test i have created another stand alone Windows 2008 R2 Server with File Server...
View ArticleUnable to set NodeAndFileShareMajority quorum setting
Set-ClusterQuorum : There was an error configuring the file share witness '\\server\SharedFolderUnable to save property changes for 'File Share Witness'. The user name or password is incorrect At...
View Articledisappearing iSCSI Targets
I'm new to clustering.I have two identical computers. Same box, same model, each with 2 NIC's, same hard drives, same memory etc . . . . .I installed Win-Server 2012 R2 - Standard on each box, then...
View ArticleClik here to view.
Unable to connect to cluster
Hi Team,I am not able to connect to cluster in windows 2012 server getting error message as below.Sivakumar Thayumanavan
View ArticlePerformance AlwaysOn SQL 2014 in synchronous mode
Hello,I have found a great article about AlwaysOn performance in synchronous...
View ArticleSql Server 2014
Can we configure active passive clustering on sql server 2014 without any licence?
View ArticleValidate Network Communication Error on UDP port 3343
Both side firewall is off but still i get this error. Server1 is windows server 2016 and server2 is windows server 2012 R2. even i added allow connection rule in advanced firewall setting as outbound...
View Articleunable to delete clustered virtual machine
I have a 7 node hyperv 2012 clustered environment. Today, we experienced an issue with connectivity back to the shared CSV environment. To make a long story short, I now have 4 Virtual machines that...
View ArticleServer 2016 Stretch Cluster with HV Shared Storage (FSW Replica Question)
Hi all, I'm building a new 2016 RDS platform across two sites and wish to use both user profile disks and user environment virtualisation. The latter also being used for desktop clients. There will be...
View ArticleReplica Broker Failed state
hi guys,First off, some info:I'm helping set-up a DR site for a client and they'll be using Hyper-V Replica. The DR servers are up and running in a cluster and all roles have been configured including...
View ArticleBest Way to Create Two Node Cluster if 1 Node Already Has VM's
Hello Everyone,We have 2 HP ProLiant DL380 Gen 9 servers. I'm in the process of upgrading the servers from Server 2012 R2 Datacenter to Windows Server 2016 Datacenter. Each server has 20) 900 GB SAS...
View ArticleScript Not Working in Cluster
I'm trying to understand why the script I have setup isn't working properly. It appears to work fine outside of the cluster but doesn't kill the processes I'm wanting to kill.I have a service I want to...
View ArticleHyper-V 2012 R2 Clustering HA - SQL 2014
HEllo,I recently configured Hyper-V 2012 R2 Clustering HA with 2 baremetal nodes and EMC storage attached. I need to configure a SQL environment and need some guidance on design. do i create one VM for...
View Article