A CAU Problem
helloraise a problem about CAU. Below is details:enviroment : windows 2012 cluster. 3 Nodes( HV01, HV02,HV03)analyze the cluster updating readiness on one node(HV01). get an error:title: windows...
View ArticleClik here to view.
Shared storage. Disks fail to start
So i am just trying to setup a virtual Scale out file server for practice. I am trying to use Local Virtual Storage also.At the very last step stuff breaks down.Can anyone tell me why this is...
View ArticleAdding a 10Gb/e interface to a failover cluster
I have a Failover Cluster created with 2 nodes. Currently there are 5 networks available (Cluster Network 1 (2x1Gb/s teamed), iSCSI 1, iSCSI 2, Live Migration, and CSV) showing up. They are running...
View ArticleFile Share Witness on a NAS Drive
Hi, i have 2 sets of Always On Clusters (2 nodes in each) 1 set is 2008R2 and the other 2012. I need to configure a File Share Witness on both clusters that reside on a NAS Drive. After configuring...
View ArticleCluster volume showing full as full when it is not
Dear Team,Our company have Hyper view cluster, One of volume is showing not free spaceI checked that volume stored on one VMI loged and checked that VM Drives(C and D),That s Have free space Why is...
View ArticleDoes CAU always reboot or only if required?
Howdy,I'm looking for a way to speed u pour cluster patching and it was suggested that I could manually install all the patches except 1 on each server ahead of time. Then, when I run CAU, it should...
View ArticleThe Resource or one of its providers has locked status.
HiI have 4 vms in powered off state and unable to power it on in SCVMM / Hyper V 2012 R2. I saw some articles on Hyper V forums and try powering on it via Hyper V failover cluster. I got this error...
View ArticleStrange behavior removing LUN from Cluster Manager
Good morning,I'm wondering if anybody has experience the below behavior, and how they managed to avoid it happening.We had several LUNS on one SQL Failover cluster instance and wanted to remove a...
View ArticleNetwork Load Balancing is not load balancing applications
In Our environment, we have NLB clusters which has been configured in Unicast mode.NLB is not load balancing the applications and port rule also set as 0 to 65535, also single affinity has been...
View ArticleHow to configure Cluster Aware Updating to WSUS Server
hellogreetings!!Homer here again. Today, i want to seeking some tech support on CAU configuration.i have completed mostly CAU configuration on my windows 2012 cluster and passed the readiness test....
View ArticleDell 2950 and Dell MD3000 Cluster problem
hi everyonei'm trying with MD3000 San with 15 disk to build cluster at windows 2003 server 64Bitbut one of server can't initialize disks always get error second server can mount drives easy and working...
View ArticleTraffic on wrong nics
My setup is a 4 Node Server 2012R2 Hyper V cluster with all the VM located on a 2 Node Server 2012R2 SOFS cluster.Our network setup is 2 10GB private switches and 1 1GB public switch. However pretty...
View ArticleGuide on how to setup Server, Live Migration, Management network - Hyper-V...
I have 6 NIC installed on server and would like to setup network correctly.Is there any videos or guide step-by step guide on how to setup server network, live migraton network, management network?Thanks,
View ArticleCan CAU patch mroe than one machine at a time?
Howdy,We have a 5 node (soon to be 6) Hyper-V cluster. We currently have enough resources in them that we could run all our VMs on only 3 nodes. Is there any way to tell CAU to patch 2 nodes at a...
View ArticleA write to Shared VHDX prompts addtional I/O IRP'sapart from the CSV volume...
I have a HyperV Failover Cluster with 2 nodes having a shared CSV Volume . When the co ordinator node for the disc changes ,In that co-ordinator node , an NTFS volume gets mounted . I am building a...
View ArticleCluster Hostname Registers in Place of Existing Host DNS Record
I have a six node cluster named HVCL01 with an IP address of 192.168.0.149. Whatever the current host server is for the cluster has a name record with the same IP address. So, if the current host...
View ArticleEvent id 1196, 1228
Hi,We are configuring SQL AlwaysOn cluster in windows server 2012 R2. We have 3 servers placed in the datacenter at seperate sites. 2 servers will be used for failover cluster and remaining one is used...
View Article2012R2 Cluster Query
Hi, I am looking at having a two node cluster, HA Hyper-V Cluster, but no shared storage. I can use SMB shares with 2012R2 and create the storage this way? Meaning I can Live Migrate, use CSV's?...
View ArticleLSI Syncro RAID Controler
Hi,I am a Computer Engineer student and I want to work with LSI Syncro RAID controller to build a High Available Storage system.I have a question about this product, As I read the User Guide of it, I...
View Articlecluster service disabled while adding node to Exchange 2010cluster dag
unable to add the node on DAG ErrorA database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static...
View Article